HENAN ZHONGCHUANG PURE EP EUIPMENT CO.,LTD

As a  Filter Press Accessories Supplier , let's share with you why Membrane Filter Press has a lower moisture content. Membrane Filter Press is used to make the filter plate expand and deform, and the filter cake is secondarily pressed to further reduce the moisture of the filter cake. The Membrane Filter Press is different from other types of filter press filter plates at the beginning of design. The subversive filter press must be solid, stable and not easily deformed. The Membrane Filter Press filter plate has opened up a new way to create a hollow filter plate. Membrane Filter Press filter plate adopts the same feed splitter channel as the filter press filter plate, and the channel is designed in the middle of the filter plate, so that the filtrate flowing in from the feed pipe flows uniformly from the middle of the filter plate to the periphery. The filter cloth in the  Membrane Filter Press  is brought into contact with the filtrate, filtered and separated. T...

As a  Filter Equipment Company , let us introduce the discharge of the filter of the plate and frame filter press. 1. The filtrate is first pumped into the water inlet pipe of the filter press by the feed pump, and the feed pump gradually increases the filtrate of the water inlet pipe, so that the filtrate enters the two water distribution pipes under high pressure conditions. 2. The water distribution pipe is connected to the two inlet valve bars above the plate and frame filter press, so that the filtrate enters the two distribution pipes above the filter plate of the plate and frame filter press. 3. The material distribution pipe is formed by splicing and splicing the filter plates one by one. On the side of the uniform direction of each filter plate, there is a channel or groove leading to the central depression of the filter plate. 4. The filtrate in the filter pipe of the filter plate is divided into the filter chamber composed of each filter plate and plate frame ...

As a  Filter Accessories And Equipment Factory , we have the following recommendations for the safety of the filter press. 1. When the filter press is operated, the hydraulic station operating system cannot align the main engine cylinder to prevent malfunction during high pressure, causing personnel to be injured or injured. 2. Do not open the electric control box touch terminal or motor connection box when the device is powered on to prevent electric shock. 3. When the  Automatic Filter Press  is pressed against the filter plate, it is forbidden to put the hand into the filter plate to arrange the filter cloth, otherwise it will cause personal injury. 4. The hydraulic station is in operation or high pressure. It is forbidden to disassemble the hydraulic components to prevent the high pressure hydraulic oil from splashing and injuring people. At the same time, it is forbidden to stay in front of the high pressure oil chamber.

The whole cleaning process of the filter press, we all know, after the filter press operation, there will be a little residue of filter residue. In order not to affect the further filtration operation, we need to clean the filter press in time. As a  Vehicle Mounted Filter Press Supplier , we have summarized the entire process of filter press cleaning, which is summarized as follows: The first thing to note is that before cleaning, we need to understand the properties of the filter cloth filter, so as to choose the corresponding cleaning method. 1. Select the weak base water and soak the filter cloth for 10~24 hours. 2. Then repeat the sputum on the filter cloth, wash it with clean water, then dry it to 90% dry and then operate again. Secondly, we can use the manual method when cleaning the  Plate and Frame Jack Compacting Filter Press . 1. Remove the filter from the plate frame and soak it in water. 2. Repeatedly rubbing with your hands, plus detergent. 3. You ...

As a  Filter Press Accessories Supplier , we continue to share with you the safe operation requirements of the filter press. 5. When the feeding of the equipment is not finished, it is forbidden to loosen the filter plate according to the stroke switch, otherwise it will cause material leakage and even cause personal injury. 6. When the equipment is being repaired, the total power switch of the filter press should be turned off. 7. When rinsing the filter cloth, water is not allowed to splash on the electrical components. 8. It is forbidden to operate the filter press when the filter plate is missing, so as to avoid accidents caused by insufficient stroke of the cylinder. 9. If the electric contact pressure gauge and overflow valve of  Chamber Filter Press  are damaged, they should be replaced in time to prevent the hydraulic cylinder from being in a high pressure state for a long time, causing personnel damage caused by bursting.

In some cases, the filter press may stop working during the working process, which is very bad for the machine, which causes the filter press to stop working. As a  Filter Press Accessories Supplier  Let us analyze it together. An error in the filter press control system can cause the filter press equipment to stop working. We all know that when the filter press equipment is working, it needs a control system to control the hydraulic system and control the range of its expansion and contraction, so as to control the power generated by the hydraulic system to the filter plate, and the power received by the filter plate can be transmitted to the filter. On the liquid, and the filtrate is directly exposed by the pressure to penetrate the filter cloth, so the control system of the filter press equipment directly affects the filtration of the filtrate. When there is an error in the control system, or the control of the hydraulic system can not be issued, or the control syste...

As a  Hydraulic Filter Press Factory , we continue to share the precautions for diaphragm filter presses. 8. Once the equipment starts working, the equipment cannot be adjusted. If the pressure gauge is damaged or the pressure gauge is not installed, it must not be turned on; 9. When the oil pipe is replaced for the first time, the operator should stay away from the high pressure oil pipe; 10. The equipment can not be overloaded for a long time, otherwise it may burn out the motor or damage the parts; 11. Clean up the entry and exit channels in time, and prevent the blockage of the import and export channels; 12. When removing slag, clean the filter cloth and the plate frame; 13. The filter plate and filter frame should not be exposed to oil, acid and alkali, etc. Keep away from heat and sunlight. Our company also offers the  Round High Pressure Filter Press . Welcome to contact us.