How To Reduce The Loss Of The Automatic Pressure Maintaining Filter?

Some customers feel that the pressure loss of the filter press is getting bigger and bigger after using the Automatic Pressure Maintaining Filter for a period of time. A large part of the situation is caused by the lack of pressure of the filter press. On the one hand, the machine itself is aging or malfunctioning. When the machine is running, it may overheat, which is relatively large for the filter plate and filter cloth. When the loss of the filter press is increased, find the cause of the problem, solve the problem as soon as possible, and do not let the equipment always be in a fault condition. As a Filter Accessories And Equipment Factory, we have the following recommendations.
1. When the sludge is too thick or dry, it will cause blockage of the feed port. At this time, there is no medium between the filter plates, only the pressure of the hydraulic system itself is left. damage. A nylon cleaning blade should be used to remove the mud from the feed port.
2. Insufficient supply or improper solid particles in the feed will also cause excessive stress on the Automatic Pressure Maintaining Filter itself. Complete this cycle to reduce the filter plate volume or add blind plates.
3. If the outlet is blocked by solids or the supply valve is closed or the valve is closed when starting, the pressure is not leaked and damage is caused. Check the filter cloth, clean the drain, check the water outlet, open the corresponding valve, and release the pressure.
4. When the filter plate is not cleaned, it sometimes causes the medium to leak. Once it is leaked, the edge of the plate frame will be washed out with a small groove. The pressure of the medium will not increase, and the mud cake cannot form. . At this time, the filter plate should be carefully cleaned.
Therefore, during the daily operation, we must maintain and maintain the Automatic Pressure Maintaining Filter to avoid unnecessary damage.
Automatic Pressure Maintaining Filter

评论

发表评论

此博客中的热门博文

How To Choose Filter Cloth?

图片
The choice of  filter cloth  is very important for the filtration effect. The filter cloth plays a key role in the use of the filter press. Its performance is good or bad, and the correctness of the selection directly affects the filtering effect. The most common filter cloth currently used is a filter cloth made of synthetic fibers. According to the material, it can be divided into polyester, vinylon, polypropylene, nylon and so on. In order to achieve the interception effect and the filtration speed are ideal, in the selection of the filter cloth, it is also necessary to select according to the particle size, density, chemical composition and filtration process conditions of the slurry. Due to the difference in materials and methods of weaving, the strength, elongation, gas permeability and thickness of the filter cloth are different, which affects the filtering effect. In addition, the filter media also includes cotton woven fabrics, non-woven fabrics, screens, filter ...
阅读全文

Precautions for Using the Plate Frame Filter Press in Summer

图片
In summer, the temperature is high and the humidity is high. Many machines and equipment are overloaded due to overheating of the machine during operation, and the filter press is no exception. When using Plate and Frame Filter Press in summer, it is important to pay attention to the operating state of the plate and frame filter press to prevent damage caused by overload operation from affecting the filter press. So, what should you pay attention to during use?  Plate Frame Filter Press Factory  to explain to you. First, we pay attention to the hydraulic system. Since the equipment will repeatedly pressurize the filter plate during the working process, the hydraulic system will work frequently, withstand the huge pressure on the filter plate, the weather is hot, and the hydraulic device is easily overheated. Since the hydraulic unit itself is a highly enclosed component, some simple cooling methods are not ideal for hydraulic systems. Therefore, when using the Plate and Fra...
阅读全文

What is The Working Principle Of Filter Press

图片
A  Filter Press  is most commonly used to dewater sludge Made from industrial wastewater treatment plants. Filter Press Manufacturers  tell you the first stage of dewatering in a filter press is chemical conditioning. This is normally achieved by dosing a polymer into a mixed sludge storage tank upstream of the filter press. The flocculant will bind the sludge particles to larger flocs that are thicker and easier to dewater from the press. The slurry is then introduced through the center of the press where it fills the chambers between the plates. The pressure forces the liquid through the  Filter Cloth , whilst solids are retained between the plates. The filtrate flows between ridges in the plates to the corners where it discharges. The stages are as follows: 1. The chamber is empty, but has been sealed closed by the hydraulic ram. The press is ready to receive wet solids. 2. The wet solids are fed into the c...
阅读全文