What elements ensure the safe use of Filter Press?

　As a Filter Press Manufacturers, there is some information I want to share it with you. The maintenance of the filter press equipment during the use is very important. It is necessary to lubricate and maintain the mating part and the transmission part, especially the feedback signal position of the automatic control system (electric contact pressure gauge and stroke switch, etc.) and hydraulic system hydraulic components. Accuracy and reliability must be guaranteed in order to maintain normal operation, and the following should be done:
　　1. Check carefully whether the joints of the filter press equipment are firm at all times, and whether the parts are used well. If abnormal conditions are found, the maintenance personnel should be notified in time for maintenance.
　　2. Check the pull plate trolley, sprocket chain, bearing, piston rod, and other parts regularly so that the matching parts are kept clean and the lubrication performance is good. The hydraulic filter press instruction manual is good to ensure the movement is flexible. The synchronism and the drape of the chain should be adjusted in time.
　　3. The pressure filter equipment should regularly conduct insulation and reliability tests on the electronic control system, and find that the accuracy and inflexibility caused by the electrical components are inaccurate, etc., and should be repaired or replaced in time.
　　4. The maintenance of the hydraulic system is mainly for the inspection and maintenance of the sealing of the hydraulic components and the interfaces.
　　5. Always check the sealing surface of the filter plate of the filter press equipment to ensure it is clean and clean. Before pressing, check the filter cloth carefully to ensure that it is not folded, damaged, or slag-free, so that it is well-prepared. In order to ensure the filtration effect; at the same time, the filter cloth should be washed frequently to ensure the filtration performance of the filter cloth.
　　6. If the filter press equipment is not used for a long time, the filter plate should be cleaned and drained neatly on the frame of the filter press and pressed with a pressure of 1 to 5 MPa. The filter cloth is dried after drying; the exposed part of the piston rod and the integrated block should be buttered.
　　7. The hydraulic oil uses HM46 or HM68, and the filter press must be kept clean. The hydraulic oil should be replaced once when the new machine is running for the first time. When changing the oil, the hydraulic oil used in the fuel tank and the cylinder should be drained and the fuel tank cleaned. The filter press will continue to be replaced after one month and will be replaced once in the next six months. This will ensure the normal use of the filter press equipment.
What elements ensure the safe use of Filter Press?
Plate And Frame Filter Press
　　The development of industry has caused certain damage to environmental pollution. Therefore, for many machines, today, environmental protection and low carbon are required. The same is true for filter presses. In addition to high requirements for energy conservation and environmental protection, many companies have solid-liquid separation. Technology and equipment have put forward higher and wider requirements, so the breadth and depth of filter press applications are still expanding.
　　The reason why Plate And Frame Filter Press can flourish and be widely used in various industries, its greatest advantage is positive pressure, high pressure, and pressure dehydration, the pressure difference is much larger than the traditional vacuum filter, so the filter cake is low in water. Less energy consumption, less metal loss, and clear and transparent filtrate. As early as more than a decade ago, some experts pointed out that Chamber Filter Press is the only equipment in all industrial filters that can ensure that the filter cake moisture reaches less than 10% and can be free of flocculant.

评论

发表评论

此博客中的热门博文

How To Choose Filter Cloth?

图片
The choice of  filter cloth  is very important for the filtration effect. The filter cloth plays a key role in the use of the filter press. Its performance is good or bad, and the correctness of the selection directly affects the filtering effect. The most common filter cloth currently used is a filter cloth made of synthetic fibers. According to the material, it can be divided into polyester, vinylon, polypropylene, nylon and so on. In order to achieve the interception effect and the filtration speed are ideal, in the selection of the filter cloth, it is also necessary to select according to the particle size, density, chemical composition and filtration process conditions of the slurry. Due to the difference in materials and methods of weaving, the strength, elongation, gas permeability and thickness of the filter cloth are different, which affects the filtering effect. In addition, the filter media also includes cotton woven fabrics, non-woven fabrics, screens, filter ...
阅读全文

Precautions for Using the Plate Frame Filter Press in Summer

图片
In summer, the temperature is high and the humidity is high. Many machines and equipment are overloaded due to overheating of the machine during operation, and the filter press is no exception. When using Plate and Frame Filter Press in summer, it is important to pay attention to the operating state of the plate and frame filter press to prevent damage caused by overload operation from affecting the filter press. So, what should you pay attention to during use?  Plate Frame Filter Press Factory  to explain to you. First, we pay attention to the hydraulic system. Since the equipment will repeatedly pressurize the filter plate during the working process, the hydraulic system will work frequently, withstand the huge pressure on the filter plate, the weather is hot, and the hydraulic device is easily overheated. Since the hydraulic unit itself is a highly enclosed component, some simple cooling methods are not ideal for hydraulic systems. Therefore, when using the Plate and Fra...
阅读全文

What is The Working Principle Of Filter Press

图片
A  Filter Press  is most commonly used to dewater sludge Made from industrial wastewater treatment plants. Filter Press Manufacturers  tell you the first stage of dewatering in a filter press is chemical conditioning. This is normally achieved by dosing a polymer into a mixed sludge storage tank upstream of the filter press. The flocculant will bind the sludge particles to larger flocs that are thicker and easier to dewater from the press. The slurry is then introduced through the center of the press where it fills the chambers between the plates. The pressure forces the liquid through the  Filter Cloth , whilst solids are retained between the plates. The filtrate flows between ridges in the plates to the corners where it discharges. The stages are as follows: 1. The chamber is empty, but has been sealed closed by the hydraulic ram. The press is ready to receive wet solids. 2. The wet solids are fed into the c...
阅读全文