Reasons For Overheating Membrane Filter Press

As a Filter Accessories And Equipment Factory, let's talk about the reasons for the overheating of the Membrane Filter Press.There are two reasons why the Membrane Filter Press is overheated: one is the hydraulic system and the other is the Membrane Filter Press filter plate. The hydraulic system of the filter press is closely related to the temperature. It can control the hydraulic system through the heat release device of the device, so that the filter press can operate normally, and the demand is particularly important that the temperature of the hydraulic station should not be too high, because This will affect the hydraulic system and then cause the system to not function properly. The Membrane Filter Press filter plate is made of polypropylene. It can be used to avoid overheating, slow down the temperature, reduce the differentiation and oxidation of the Membrane Filter Press filter plate, and the application cycle of the filter plate.  Reduce the damage of the filter plate, increase the production rate, and obtain greater profit.

Membrane Filter Press

评论

发表评论

此博客中的热门博文

How To Choose Filter Cloth?

图片
The choice of  filter cloth  is very important for the filtration effect. The filter cloth plays a key role in the use of the filter press. Its performance is good or bad, and the correctness of the selection directly affects the filtering effect. The most common filter cloth currently used is a filter cloth made of synthetic fibers. According to the material, it can be divided into polyester, vinylon, polypropylene, nylon and so on. In order to achieve the interception effect and the filtration speed are ideal, in the selection of the filter cloth, it is also necessary to select according to the particle size, density, chemical composition and filtration process conditions of the slurry. Due to the difference in materials and methods of weaving, the strength, elongation, gas permeability and thickness of the filter cloth are different, which affects the filtering effect. In addition, the filter media also includes cotton woven fabrics, non-woven fabrics, screens, filter ...
阅读全文

Precautions for Using the Plate Frame Filter Press in Summer

图片
In summer, the temperature is high and the humidity is high. Many machines and equipment are overloaded due to overheating of the machine during operation, and the filter press is no exception. When using Plate and Frame Filter Press in summer, it is important to pay attention to the operating state of the plate and frame filter press to prevent damage caused by overload operation from affecting the filter press. So, what should you pay attention to during use?  Plate Frame Filter Press Factory  to explain to you. First, we pay attention to the hydraulic system. Since the equipment will repeatedly pressurize the filter plate during the working process, the hydraulic system will work frequently, withstand the huge pressure on the filter plate, the weather is hot, and the hydraulic device is easily overheated. Since the hydraulic unit itself is a highly enclosed component, some simple cooling methods are not ideal for hydraulic systems. Therefore, when using the Plate and Fra...
阅读全文

What is The Working Principle Of Filter Press

图片
A  Filter Press  is most commonly used to dewater sludge Made from industrial wastewater treatment plants. Filter Press Manufacturers  tell you the first stage of dewatering in a filter press is chemical conditioning. This is normally achieved by dosing a polymer into a mixed sludge storage tank upstream of the filter press. The flocculant will bind the sludge particles to larger flocs that are thicker and easier to dewater from the press. The slurry is then introduced through the center of the press where it fills the chambers between the plates. The pressure forces the liquid through the  Filter Cloth , whilst solids are retained between the plates. The filtrate flows between ridges in the plates to the corners where it discharges. The stages are as follows: 1. The chamber is empty, but has been sealed closed by the hydraulic ram. The press is ready to receive wet solids. 2. The wet solids are fed into the c...
阅读全文