How to Install Plate and Frame Filter Press?

Filter Press Supplier would like to share the installation method of the plate and frame filter press with you:

Plate And Frame Filter Pres

Plate And Frame Filter Press

1. Design the pre-buried hole according to the size of the foot provided by the supplier, using two grouting methods.
2. There should be enough space around the filter press for easy operation and maintenance.
3. The Plate And Frame Filter Press should be placed horizontally on the floor, and the rear top plate should be fixed on the foundation with the foot screw. (Note: the bottom screw is generally only fixed to the rear top plate. Because the pull-drying has a certain downward bending due to the pressure of the plate frame. When the filter press is pressed, the pull-drying is straightened, resulting in a small displacement. If the two ends are fixed at the same time, which may cause the pressure to not be tight or damage the frame.)
4. The material and specifications of the filter cloth are determined according to the filtered material, pressure and temperature. The appropriate filter cloth should be selected.
5. The plate frame is neatly discharged on the frame according to the requirements, and the processed filter cloth is neatly arranged on the filter plate. Note that the feed holes between the filter plates correspond to the rinsing holes.
6. The plate and frame filter press is powered on and checked for proper operation. The mechanical transmission should check whether the motor is reversing or not, whether the gearbox or the oil in the oil head of the head is full, and whether the screw and gear oil are added. The hydraulic drive checks whether the gear pump running sound is normal, whether the hydraulic system has leakage or not, and whether the piston rod is in and out smoothly.

评论

发表评论

此博客中的热门博文

How To Choose Filter Cloth?

图片
The choice of  filter cloth  is very important for the filtration effect. The filter cloth plays a key role in the use of the filter press. Its performance is good or bad, and the correctness of the selection directly affects the filtering effect. The most common filter cloth currently used is a filter cloth made of synthetic fibers. According to the material, it can be divided into polyester, vinylon, polypropylene, nylon and so on. In order to achieve the interception effect and the filtration speed are ideal, in the selection of the filter cloth, it is also necessary to select according to the particle size, density, chemical composition and filtration process conditions of the slurry. Due to the difference in materials and methods of weaving, the strength, elongation, gas permeability and thickness of the filter cloth are different, which affects the filtering effect. In addition, the filter media also includes cotton woven fabrics, non-woven fabrics, screens, filter ...
阅读全文

Precautions for Using the Plate Frame Filter Press in Summer

图片
In summer, the temperature is high and the humidity is high. Many machines and equipment are overloaded due to overheating of the machine during operation, and the filter press is no exception. When using Plate and Frame Filter Press in summer, it is important to pay attention to the operating state of the plate and frame filter press to prevent damage caused by overload operation from affecting the filter press. So, what should you pay attention to during use?  Plate Frame Filter Press Factory  to explain to you. First, we pay attention to the hydraulic system. Since the equipment will repeatedly pressurize the filter plate during the working process, the hydraulic system will work frequently, withstand the huge pressure on the filter plate, the weather is hot, and the hydraulic device is easily overheated. Since the hydraulic unit itself is a highly enclosed component, some simple cooling methods are not ideal for hydraulic systems. Therefore, when using the Plate and Fra...
阅读全文

What is The Working Principle Of Filter Press

图片
A  Filter Press  is most commonly used to dewater sludge Made from industrial wastewater treatment plants. Filter Press Manufacturers  tell you the first stage of dewatering in a filter press is chemical conditioning. This is normally achieved by dosing a polymer into a mixed sludge storage tank upstream of the filter press. The flocculant will bind the sludge particles to larger flocs that are thicker and easier to dewater from the press. The slurry is then introduced through the center of the press where it fills the chambers between the plates. The pressure forces the liquid through the  Filter Cloth , whilst solids are retained between the plates. The filtrate flows between ridges in the plates to the corners where it discharges. The stages are as follows: 1. The chamber is empty, but has been sealed closed by the hydraulic ram. The press is ready to receive wet solids. 2. The wet solids are fed into the c...
阅读全文